ATMXT224-CCU
- Circuit Protection
-
Integrated Circuits (ICs)
- Amplifier ICs
- Audio Special Purpose
- Clock Timing ICs
- Data Acquisition ICs
-
Embedded ICs
- Analog Switches - Special Purpose
- Analog Switches, Multiplexers, Demultiplexers
- CODECs
- Controllers
- Direct Digital Synthesis (DDS)
- Drivers, Receivers, Transceivers
- Encoders, Decoders, Converters
- Filters - Active
- I_O Expanders
- Modems - ICs and Modules
- Modules
- Sensor and Detector Interfaces
- Sensor, Capacitive Touch
- Serializers, Deserializers
- Signal Buffers, Repeaters, Splitters
- Signal Terminators
- Specialized
- Telecom
- UARTs (Universal Asynchronous Receiver Transmitter)
- Voice Record and Playback
- Interface ICs
- Linear ICs
-
Linear ICs
- Buffers, Drivers, Receivers, Transceivers
- Comparators
- Counters, Dividers
- FIFOs Memory
- Flip Flops
- Gates and Inverters
- Gates and Inverters - Multi-Function, Configurable
- Latches
- Multivibrators
- Parity Generators and Checkers
- Shift Registers
- Signal Switches, Multiplexers, Decoders
- Specialty Logic
- Translators, Level Shifters
- Universal Bus Functions
- Logic ICs
- Specialized ICs
- Isolators
- Memory
-
Power Management ICs
- AC DC Converters, Offline Switchers
- Battery Chargers
- Battery Management
- Current Regulation_Management
- Display Drivers
- Energy Metering
- Full, Half-Bridge Drivers
- Gate Drivers
- Hot Swap Controllers
- Laser Drivers
- LED Drivers
- Lighting, Ballast Controllers
- MOSFET, Bridge Drivers
- Motor Drivers, Controllers
- Motor, Bridge Drivers
- OR Controllers, Ideal Diodes
- PFC (Power Factor Correction)
- Power Distribution Switches, Load Drivers
- Power Management - Specialized
- Power Over Ethernet (PoE) Controllers
- Power Supply Controllers, Monitors
- RMS to DC Converters
- Supervisors
- Thermal Management
- VF and FV Converters
- Voltage Reference
- RF_IF and RFID
- Sensors, Transducers
Your shopping cart is empty!
Product Description
Touch Sensor Capacitive 1.8V to 3.3V Surface Mount - Tape and Reel (Alt: ATMXT224-CCU)
Key Features
- maXTouch™ Touch screen
- True 12-bit multi-touch with independent XY tracking for up to 10 concurrent touches in real time with touch size reporting
- Up to 4.3 inch diagonal screen size supported with 10 mm “pinch” separation
- Up to 10.1 inch support with correspondingly wider “pinch”
- Number of Channels
- Up to 224 (subject to other configuration limitations)
- Electrode grid configurations up to 20 X by 10 Y lines supported (subject to 30 total pins and a maximum of 14 Y lines)
- maXTouch Touch Key Support
- Up to 32 channels can be allocated as fixed keys (subject to other configurations)
- Zero Additional Part Count
- 16 X by 14 Y matrix (224 channels) implementable with power bypass capacitors only
- Signal Processing
- Advanced digital filtering using both hardware engine and firmware
- Self-calibration
- Auto drift compensation
- Adjacent Key Suppression® (AKS™) technology
- Grip and face suppression
- Reports one-touch and two-touch gestures
- Down-scaling and clipping support to match LCD resolution
- Ultra-fast start-up and calibration for best user experience
- Supports axis flipping and axis switch-over for portrait and landscape modes
- Scan Speed
- Maximum single touch >250Hz, subject to configuration
- Configurable to allow power/speed optimization
- Programmable timeout for automatic transition from active to idle states
- Response Times
- Initial latency <10 ms for first touch from idle, subject to configuration
- Sensors
- Works with PET or glass sensors
- Works with all proprietary sensor patterns recommended
- Works with passive stylus
- Panel Thickness
- Glass up to 3 mm, screen size dependent
- Plastic up to 1.5 mm, screen size dependent
- Interface
- I²C-compatible slave mode 400 kHz
- Dual-rail Power
- Interface 1.8V to 3.3V nominal, analog 2.7V to 3.3V nominal
- Power Consumption
- Idle 80Hz: <1.8 mW, subject to configuration
- One Touch Active 80Hz: 3.9 mW, subject to configuration
- Sleep: 4.5 µW
- Package
- 49-ball UFBGA 5 x 5 x 0.6 mm, 0.65 ball pitch
- 49-ball VFBGA 5 x 5 x 1 mm, 0.65 ball pitch
- 48-pin QFN 6 x 6 x 0.6 mm, 0.4 mm pin pitch
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!